High in the Blue Mountains of New South Wales lies one of Australia’s most remarkable nineteenth-century railway engineering achievements.
The Great Zig Zag Railway near Lithgow was built to carry trains down the steep western side of the mountains at a time when constructing a direct railway route seemed almost impossible.
Opened in 1869, the railway used a series of reversing tracks, stone viaducts and tunnels to overcome the difficult terrain.
For more than 40 years, it carried passengers and freight between Sydney and western New South Wales.
Then, in 1910, a new railway deviation made the zigzag route unnecessary.
The trains moved to a different alignment, and the original line fell silent.
Today, the Great Zig Zag survives as an extraordinary reminder of the ingenuity of Australia’s early railway engineers.
The Challenge of Crossing the Blue Mountains
During the nineteenth century, expanding railway connections were essential to the development of inland New South Wales.
The railway had already crossed much of the Blue Mountains, but engineers faced a major obstacle near Lithgow.
The western escarpment dropped steeply towards the valley below.
Building a conventional railway down such a sharp descent presented enormous difficulties.
Steam locomotives of the period could not safely negotiate extremely steep gradients.
Engineers needed a way to lower trains gradually without constructing an excessively long route through the mountains.
The solution was an ambitious zigzag railway.
John Whitton’s Remarkable Design
The Great Zig Zag was designed under the direction of John Whitton, Engineer-in-Chief of the New South Wales Railways.
Whitton was responsible for many of the state’s important early railway projects.
His design used a series of tracks arranged at different levels along the mountainside.
Rather than following one continuous downhill route, trains travelled along one section before reversing direction onto another.
This allowed locomotives to negotiate the steep descent in stages.
The design also required substantial engineering works.
Stone viaducts carried the railway across deep gullies, while cuttings and tunnels allowed the line to pass through difficult terrain.
Construction was demanding, particularly given the equipment available during the 1860s.
The Railway Opens in 1869
The Great Zig Zag opened on 18 October 1869.
It became a vital section of the Main Western Railway, connecting the Blue Mountains with Lithgow and the developing settlements farther west.
Passengers experienced dramatic views across the surrounding valleys.
For railway workers, however, operating the line required careful attention.
Trains had to stop and reverse direction as they moved between the different levels.
The arrangement worked, but it was slow.
As railway traffic increased, the limitations of the zigzag design became more apparent.
A Railway That Became a Bottleneck
By the late nineteenth century, the Main Western Railway was carrying increasing volumes of passengers and freight.
The Great Zig Zag created delays because trains had to reverse direction to complete the descent.
Its layout also restricted the length and number of trains that could use the route efficiently.
Railway authorities began investigating alternatives.
Advances in engineering made it possible to construct a more direct alignment through the mountains.
The solution was a new railway deviation using tunnels and a more suitable gradient.
The days of the Great Zig Zag as part of the main railway were numbered.
The Last Mainline Trains
In October 1910, the new Ten Tunnels Deviation opened.
The replacement route eliminated the need for trains to reverse direction on the steep descent.
It provided a more efficient connection between the Blue Mountains and Lithgow.
The original Great Zig Zag was bypassed.
After more than four decades of service, the remarkable railway ceased operating as part of the main western route.
Its tracks and structures remained, but the regular passenger and freight trains disappeared.
For many years, the old alignment stood as a reminder of an earlier era of railway construction.
The Railway Returns to Life
Unlike many abandoned Australian railway lines, the Great Zig Zag was eventually given a second life.
During the twentieth century, railway enthusiasts recognised the historical importance of the site.
Preservation efforts led to the development of the Zig Zag Railway, a heritage railway using part of the historic alignment.
Tourist operations began in 1975.
Visitors could once again experience steam trains travelling through the spectacular Blue Mountains landscape.
The heritage railway became a popular attraction, allowing generations of Australians to appreciate the engineering achievement of the original line.
Bushfires and Another Battle for Survival
The Zig Zag Railway faced further challenges in the twenty-first century.
Operations were suspended in 2012 because of safety and operational difficulties.
The following year, the devastating October 2013 Blue Mountains bushfires damaged railway buildings, rolling stock and infrastructure.
Volunteers faced the enormous task of repairing and restoring the railway.
Years of work followed.
The heritage railway eventually reopened to passengers in 2023.
Its return demonstrated the determination of volunteers and supporters to preserve an important part of Australian railway history.
What Remains Today?
The Great Zig Zag is one of the best-known surviving examples of nineteenth-century railway engineering in Australia.
Its historic stone viaducts, cuttings and railway alignment remain prominent features of the landscape.
The site is recognised for its engineering and heritage significance.
The modern Main Western Railway continues through the Blue Mountains using the replacement route.
Meanwhile, the heritage Zig Zag Railway preserves part of the original alignment for visitors.
The two routes tell different chapters of the same story.
One represents the continuing development of modern transport.
The other preserves the remarkable engineering methods used by Australia’s early railway builders.
The Railway That Refused to Disappear
The Great Zig Zag could easily have become another forgotten railway.
Its unusual design had served its purpose, and modern engineering had made it obsolete.
Yet its historical importance ensured that it was not completely lost.
More than 150 years after its opening, the stone viaducts and railway formation remain.
Steam trains have returned to part of the old route.
The Great Zig Zag may have lost its place on the main railway in 1910, but it has survived as one of Australia’s most remarkable railway heritage sites.
AT A GLANCE
Railway: Great Zig Zag Railway
Location: Near Lithgow, Blue Mountains, New South Wales
Designer: John Whitton
Opened: 18 October 1869
Original purpose: Carry the Main Western Railway down the western Blue Mountains escarpment
Engineering features: Reversing tracks, stone viaducts, tunnels and cuttings
Bypassed: October 1910
Replacement: Ten Tunnels Deviation
Heritage railway began: 1975
Bushfire damage: October 2013
Heritage railway reopened: 2023
What remains: Historic viaducts, railway formation and operating heritage railway sections
Today: An important railway heritage attraction
Why it matters: One of Australia’s most remarkable nineteenth-century railway engineering achievements, preserved after losing its original transport role.